Image MASSter(TM) Solo-4 G3 hard drive data
duplication unit configured with the i7 Processor. The unit features
built-in native support for SAS, SATA, eSATA, USB 3.0 and Firewire
drives. It also supports IDE, as well as a variety of Flash Media. The Image MASSter Solo-4 G3
Slim Basic system is a versatile lightweight, portable, high speed data duplication
device. Source drive's data can be copied at speeds exceeding 6GB per
minute. The unit offers multiple Copy Formats such as IQCopy which is an
"Intelligent Copy" method that copies only allocated data and creates,
scales and formats Destination partitions. The available Copy Formats
include "VHD Capture", which allows storing multiple images in a single
Destination drive or Shared Network Folder. The unit's advanced Touch
Screen user interface provides ease of use. The unit allows installation of 3rd Party
Optimized for today's High Speed Drives, the Solo-4 Duplicates and Sanitizes drives at speeds exceeding 7GB/min.
The unit's design takes advantage of current drive technology and also
prepares the user for future advances in drive speeds.
One Write Protected "Source" Port:
For the protection of the user's original images, the unit provides one
standard write protected native SATA/SAS "Source" port and one standard
write protected native USB 2.0 "Source" port for the duplication of up
to three "Target" drives. Optional Adapters allow imaging of IDE drives,
1.8" ZIF, 2.5" Laptop drives, and Flash Media such as Compact Flash,
Memory Sticks, SD, Micro SD, Multi Media card, etc.
Multiple "Target" Ports:
Provides three native SATA/SAS 'Target" ports and three native USB 2.0
"Target" ports to allow the user to make up to three copies of a single
drive. One of the "Target" ports can be configured by user as an
optional write protected "Source" port to allow the single copying of 2
different "Source" drives simultaneously. Optional Adapters will allow
imaging to other drive devices including external RAID units.
Multiple Operational Modes:
Windows Operating System:
- Single Source Copy Mode allows Duplicating from one "Source" drive to up to three "Target" drives.
- Multi Source Copy Mode allows Duplicating from two "Source" drives to two individual "Target" drives.
- Multi Operational Mode
allows performing different operations simultaneously, such as
duplicating some drives while sanitizing other drives; all without any
- Multi MASSter Mode
allows the duplication of up to three different "Target" hard drives
from images stored on a single "Source" drive. For the user's
convenience, this mode allows for multiple images to be stored on a
singe "Source" drive.
IMSolo-4 G3 Basic runs on the Windows 10 Operating System,
providing flexibility and device compatibility support. Unit can be
customized for Multi-Language support. Unit can be customized to
individual's needs upon request. Compatible with a wide range of PC
Multiple Imaging Formats: The unit provides multiple Duplication Formats:
- IQCopy which copies only allocated files, greatly reducing copy time and automatically scales and formats partitions.
- "Percent of Disk copies all sectors including unused sectors and supports any Operating System.
- Multi MASSter allows for the duplication of stored images of hard drives.
Drive Wiping: Supports Single Pass or Multi-Pass Wiping using the DoD Standard to permanently erase all data from hard drives.
"On the fly" Drive Image Encryption*:
Utilizing the built-in AES 256 Encryption Technology the Image MASSter
Solo-4 G3 Basic encrypts with minimal speed degradation all
digital data during the Acquisition Process for the purpose of safe
guarding sensitive information. The Image MASSter Solo-4 G3 Basic
creates a secure key with a user-chosen pass phrase. An AES
256 encryption key is then generated by the Image MASSter Solo-4 G3
and can be saved to any USB thumb drive. The encrypted drive
can be decrypted on the fly utilizing the Image MASSter Solo-4 G3 Basic
or any regular PC loaded with the ICS-JMR free decryption
utility and the USB thumb drive containing the saved key. User can then
safely image the decrypted data to an additional target drive. The
IMSolo-4 SATA-3 G3 Basic supports the AES 256-bit block cipher
Encryption Standard, which has been approved by NIST and chosen in the
US as the government standard. The IMSolo-4 G3 Basic AES
Encryption Algorithm is hardware based and is embedded and implemented
directly through the unit's VIA Nano Processor. VIA Technologies, VIA
Nano Processor has been validated as correctly implementing the AES
algorithm as indicated in the attached NIST report titled,
"The Advanced Encryption Standard Algorithm Validation List." See Validation # 1229.
* This process is NOT compatible with the DiskCypher product line
Upload and Download Images to Network Storage Area:
Images files can be uploaded and downloaded to a Network Storage Area.
This will allow the user to take advantage of large storage platforms
(SAN) for the purpose of processing and archiving images.
Preview active files on the "Source" drive utilizing Windows file
viewing capabilities in a write protected environment.USB Card Reader
Support: Optional 3rd Party USB Card Reader Support allows use of Flash
Media such as Compact Flash, Memory Sticks, SD, Micro SD, Multi Media
By default, the "Source" port is permanently write-protected.
Optionally, any "Target" port can be write-protected when used as a
"Source" port in Multi Source Copy Mode to avoid any accidental
overwrites to the original hard drive.
Hashing and Data Verification: Provides Read Back Verification and Hashing using MD5 or SHA algorithms for data integrity verification
Note: This is a custom built piece of equipment and there are no returns or refunds (other than warranty issues).