|
|
|
|
The Image MASSter Solo-102 IT is a compact, economical, high speed, one-to-two SATA/IDE, USB 3.0 Hard Drive Duplication Device designed as a low cost solution without sacrificing performance and versatility. Keeping up with the latest technology it includes 2 ports for new USB 3.0 interfaces with an average transfer speed of 4.7GB/min. User can make dual copies of a single Source hard drive. Additional features include 1Gigabit Ethernet port to upload images, drive encryption, source drive preview, cell phone imaging capability and more.
Featuring:
- SATA, IDE, USB3.0 interfaces
- Speeds exceeding 7GB/min
- Copy from one "Source" drive to up to 2 "Target" drives
- Easy Navigation Swapping Screen Interface
Note: This is a custom built piece of equipment and there are no returns or refunds (other than warranty issues).
- 3 SATA ports
- 4 USB 2.0 ports
- 2 USB 3.0 ports
- 1 Gigabit Ethernet port
- 5" Color Display (640x480)
- Windows 7 Special Edition Operating System
- Solo 102 ships with:
- 1 IDE Adapter with cables
- 3 SATA data and power cables
Image MASSter Solo 102 Internet/Network Connection Disclaimer
Intelligent Computer Solutions, Inc. (ICS) assumes no liability for the security of the customers computer/network systems. ICS assumes no liability for the security of the Image MASSter Solo 102 when it is connected to either the Internet or another Network. Utilizing the Image MASSter Solo 102 for to upload data to a network requires the unit to be connected to the network and this may cause a risk of the system being compromised. The user is responsible for taking the necessary steps to ensure the safety of both the Image MASSter Solo-102 and the network in use when the unit is utilized to upload data to a network. The security of the Image MASSter Solo 102 when connected to the Internet or a network relies on the users discretion; however, ICS recommends, at a minimum, to the user to take the following steps:
The Image MASSter Solo 102 is set to have Internet Connection and Automatic Windows Updates disabled as default. Users will need to enable Internet Connection when uploading data to a network. It is highly recommended that the user install anti-virus and firewall Hardware Device protection prior to connecting the Image MASSter Solo 102 to either the Internet or a network. A lesser protection can be achieved with personal firewall software. Continuously running an updated version of anti-virus software with the Image MASSter Solo 101 may help prevent an intrusion into the unit or network. ICS recommends updating the anti-virus software program every time the Image MASSter Solo 102 is connected to the Internet or a network. Users should always utilize a clean (scanned for viruses) USB Thumb Drive when updating the Image MASSter Solo 102 unit Software or Firmware. Users should ONLY connect the Image MASSter Solo 102 to a network when uploading data. It is imperative for users to REMOVE the Image MASSter Solo 102 connection when not actively performing these tasks.
These recommendations are provided to the user as a reference; however ICS cannot assure that the Image MASSter Solo 102 will not become compromised when connected to the Internet or a network. User assumes all responsibility for the data and security of the Network.
Note: This is a custom built piece of equipment and there are no returns or refunds (other than warranty issues).
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- High-speed interface support:
Implements support for SATA-2 3GB/s and USB 3.0. The unit is designed to acquire
todays High Performance drives and prepares the user with the hardware
necessary to take advantage of tomorrows hard drive speed improvements. The
units advanced Duplication Technology provides the capability of performing
multiple operations simultaneously. Capture and Wipe drives at transfer rates
exceeding 7GB/min. Average speeds are recorded as follows: 100% Capture at 6.9
GB/min.
- Rugged Design: The new Image
MASSter Solo-102 IT unit is built in a shock absorbent rugged case that allows
the Forensic Investigator to easily store, carry, and utilize the unit in even
the toughest environments.
- Small and Light Weight: The Image
MASSter Solo-102 IT weighs approximately 7 lbs and measures 10.80" x 9.85" x
4.50" (27.43cm x 25.01cm x 11.43cm)
- New Improved User-friendly touch screen
interface: color touch screen display offers an intuitive improved
interface with easy navigation including a wizard mode.
- Source/Target Connections: One
SATA-2 (e-SATA connector) port and one USB 3.0 port are available for the
Target drive position. One SATA-2 (e-SATA connector) port and one USB 3.0 port
are available for Source 1 drive position. The unit includes one IDE Adapter.
One SATA-2(e-SATA connector) port and one USB 2.0 port are available for
Evidence 2 drive position. Optional adapters are available for 1.8, 2.5,
ZIF, and micro SATA interfaces including adapters for Flash media such as
Compact Flash, Memory Sticks, SD, Micro SD, Multi Media card, etc. SCSI drives
can be acquired utilizing 3rd Party USB-to-SCSI adapters. Supports copying data
between different drive interfaces such as copying from an IDE Suspect drive
to a SATA Evidence drive.The Suspect port is Write-Protected by default to
prevent any accidental changes to the Suspect drives Data.
- Operational Modes: One-to-One Copy Mode Captures one
Target hard drive to one Source hard drive (1:1). Multi Copy Mode - Captures "Source"
hard drive to up to two "Target" hard drives (1:2). Multiple Image Storage Store
multiple Source hard drive images using a single Target hard drive. Sanitize
drives using Single Pass, DoD Standard, or Secure Erase. Hardware Accelerated
SHA-1 and SHA-2 Hashing functions. Standard MD-5 Hashing also included. Upload
Suspect images to a shared Network Storage location using the native 1 Gigabit
Ethernet interface.
- Multiple Imaging Formats: Single
Capture: Creates Mirror image of Suspects drive. Linux DD: Supports storing single or
multiple DD images (industry standard) on a single Evidence Hard Drive or USB
storage device. User can define the size of the Linux DD image segments. E01 files: Supports capturing data
using the Encase(R) Forensics image file format. IQ Copy (Optional): Used to capture
only allocated data of a Suspects drive, greatly reducing the time needed to
make a non-forensic acquisition. It is also used to duplicate drives for IT
purposes such as backup, deploy and upgrade to larger capacity drives.
- On-the-Fly Data Encryption:
Utilizing the built-in AES 256 Encryption Technology the Image MASSter
Solo-102 encrypts with minimal speed degradation all digital data during the
Acquisition Process for the purpose of safe- guarding sensitive information. The
Image MASSter Solo-102 creates a secure key with a user-chosen pass phrase. An
AES 256 encryption key is then generated by the Image MASSter Solo-102 and can
be saved to any USB thumb drive. The encrypted drive can be decrypted on the fly
utilizing the Image MASSter Solo-102 or any regular PC loaded with the ICS free
decryption utility and the USB thumb drive containing the saved key. User can
then safely image the decrypted data to an additional target drive. The Image
MASSter Solo-102 supports the AES 256-bit block cipher Encryption Standard,
which has been approved by NIST and chosen in the US as the government standard.
- Image Restore: Restore a previously
captured DD or E01 image to the original Source drive format.
- Preview Source Data: Preview
Source Drives data utilizing third party applications or using the units
built-in O/S utilities. The units preview capability allows previewing Word,
Excel, PDF, text or multimedia (pictures, video and audio) files prior to
copying data.
- Network Storage Support:
Upload Suspect images to a shared Network Storage location using
the native 1 Gigabit Ethernet interface.
- Windows 7 Special Edition Operating
System: The Image MASSter Solo-102 runs on the highly stable and
proven Windows 7 Operating System. Unit can be customized to individual
organization needs upon request.
- Logs: Store and print detail
operational Event Log information.
- Cell Phone Imaging Capable:
The Image MASSter Solo-102 IT can be used to acquire cell phones in the
field utilizing 3rd party cell phone acquisition software programs. The Image
MASSter Solo-102 IT currently ships ready to support Micro Systemation XRY and
Parabens Device Seizure
Note: This is a custom built piece of equipment and there are no returns or refunds (other than warranty issues).
|
|
|
|
|
|
Suggested Accessories for this product... |
|
|
|