Home > More > Hard Drive Duplication & Erasing >

IM SOLO-4 G3 PLUS forensic enterprise hard drive data acquisition expansion ready

IM SOLO-4 G3 PLUS FORENSIC ENTERPRISE (Expansion ready, I7 CPU With FireWire A+B)

IM SOLO-4 G3 PLUS forensic enterprise hard drive data acquisition expansion ready

Our Price: $4,324.00

Product Code: FGR-0063-200A

Qty:

Description

Technical Specs

Extended Information

IM SOLO-4 G3 PLUS FORENSIC ENTERPRISE (Expansion ready, I7 CPU With FireWire A+B)

The Image MASSter Solo-4 G3 PLUS Forensic Enterprise hard drive data acquisition unit configured with the i7 Processor and Expansion Ready hardware, offers investigators the ability to capture simultaneously at SATA-3 speed from one "Suspect" hard drive to two "Evidence" hard drives. It can also capture from two separate "Suspect" hard drives to two individual "Evidence" hard drives.

Note: This is a custom built piece of equipment and there are no returns or refunds (other than warranty issues).

Intelligent Computer Solutions, Inc. (ICS-JMR) assumes no liability for the security of the customer's computer/network systems. ICS-JMR assumes no liability for the security of the Image MASSter Solo-4 when it is connected to either the Internet or another Network. Utilizing the Image MASSter Solo-4 G3 PLUS for to upload data to a network requires the unit to be connected to the network and this may cause a risk of the system being compromised. The user is responsible for taking the necessary steps to ensure the safety of both the Image MASSter Solo-4 G3 PLUS and the network in use when the unit is utilized to upload data to a network. The security of the Image MASSter Solo-4 G3 PLUS when connected to the Internet or a network relies on the user's discretion; however, ICS-JMR recommends, at a minimum, to the user to take the following steps:

The Image MASSter Solo-4 G3 PLUS is set to have Internet Connection and Automatic Windows Updates disabled as default. Users will need to enable Internet Connection when uploading data to a network. It is highly recommended that the user install anti-virus and firewall Hardware Device protection prior to connecting the Image MASSter Solo-4 G3 PLUS to either the Internet or a network. A lesser protection can be achieved with personal firewall software. Continuously running an updated version of anti-virus software with the Image MASSter Solo-4 G3 PLUS may help prevent an intrusion into the unit or network. ICS-JMR recommends updating the anti-virus software program every time the Image MASSter Solo-4 G3 PLUS is connected to the Internet or a network. Users should always utilize a clean (scanned for viruses) USB Thumb Drive when updating the Image MASSter Solo-4 G3 PLUS unit Software or Firmware. Users should ONLY connect the Image MASSter Solo-4 G3 PLUS to a network when uploading data. It is imperative for users to REMOVE the Image MASSter Solo-4 G3 PLUS connection when not actively performing these tasks.

These recommendations are provided to the user as a reference; however ICS-JMR cannot assure that the Image MASSter Solo-4 G3 PLUS will not become compromised when connected to the Internet or a network. User assumes all responsibility for the data and security of the Network.

Note: This is a custom built piece of equipment and there are no returns or refunds (other than warranty issues).

Features

Extreme Speed Built for Today's and Tomorrow's Hard Drive Technology: Built to work with the fastest hard drives available, the Image MASSter Solo-4 G3 PLUS Enterprise Forensic data acquisition unit, authenticates and sanitizes at SATA-3 speed (32 GB/min top capability). This technology not only allows the unit to take advantage of today's fastest hard drive speeds but also allows the user to be prepared for tomorrow's future hard drive speed improvements.

One side Protected "Suspect" Port: For the protection of the user's original images, the unit provides one standard write protected native SATA/SAS "Suspect" port and one standard write protected native USB 2.0 "Suspect" port for the duplication of up to three "Evidence" drives.

Multiple "Evidence" Ports: The unit provides three native SATA/SAS "Evidence" ports and three USB 2.0 "Evidence" ports to allow the user to to capture images from a single hard drive into three hard drives. In addition one of the "Evidence" ports can be re-configured by the user to be a write protected port and act as a "Suspect" port. This allows the user to capture from two different "Suspect" drives into two separate "Evidence" drives simultaneously.

Expansion Box: The Image MASSter Solo-4 G3 PLUS Enterprise Forensic data acquisition unit is designed with a built-in support to connect to an Expansion Box, and provides the capability to capture data from additional devices which have interfaces not natively available on the Image MASSter Solo-4 G3 PLUS Entrerprise Forensic data acquisition unit. The Expansion box is configured with the following hardware:
1) FireWire 1394 PCI-Express card for connecting 1394A(1 Port) or 1394B(2 Ports) mass storage devices.
2) SCSI Ultra320 PCI-Express card for connecting SCSI mass storage devices. The Image MASSter Solo-4 PLUS Enterprise Forensic data acquisition unit can capture from 2 SCSI "Suspect" drives simultaneously with no speed degradation(*).
3) PCI-Express to ExpressCard 34 Reader for connecting a broad range of Express Card compliant cards, such as Express Card USB 3.0 adapter cards than enable user to connect USB 3.0 mass storage devices(**).
(*)External Multi-Output Power Adapter (not supplied) is required to power the second SCSI drive when capturing 2 "Suspect" SCSI drives to two "Evidence" drives simultaneously. It is also recommended to use the External Multi-Output Power Adapter to power two or more external drives connected to the Expansion Box.
(**)ExpressCards are not supplied with the Expansion Option.
Also the Expansion Box can be configured with other controllers to support different interfaces such as the support for Fiber Channel drives.

"On the fly" Drive Image Encryption*: Utilizing the built-in AES256 Encryption Technology the Image MASSter Solo-4 PLUS Forensic data acquisition unit encrypts with minimal speed degradation all digital data during the Acquisition Process for the purpose of safe guarding sensitive information. The Image MASSter Solo-4 G3 PLUS Forensic data acquisition unit creates a secure key with a user-chosen pass phrase. An AES256 encryption key is then generated by the Image MASSter Solo-4 G3 PLUS Forensic data acquisition unit and can be saved to any USB thumb drive. The encrypted drive can be decrypted on the fly utilizing the Image MASSter Solo-4 G3 PLUS Forensic data acquisition unit or any regular PC loaded with the ICS-JMR free decryption utility and the USB thumb drive containing the saved key. User can then safely image the decrypted data to an additional "Evidence" drive. The Image MASSter Solo-4 PLUS Forensic data acquisition unit supports the AES256-bit block cipher Encryption Standard, which has been approved by NIST and chosen in the US as the government standard. The Image MASSter Solo-4 G3 PLUS Forensic data acquisition unit AES Encryption Algorithm is hardware based and is embedded and implemented directly through the unit's VIA Nano Processor. VIA Technologies, VIA Nano Processor has been validated as correctly implementing the AES algorithm as indicated in the attached NIST report titled,"The Advanced Encryption Standard Algorithm Validation List." See Validation # 1229.
* This process is NOT compatible with the DiskCypher product line.

Windows 7 Operating System: The Image MASSter Solo-4 G3 PLUS Forensic data acquisition unit runs on the Windows 7 64-Bit Home Premium O/S Environment. Unit can be customized to individual organization needs upon request.

Drive Wiping: Supports single pass or full DoD drive "Sanitizing".

Multiple Hash Verifications: The Image MASSter Solo-4 G3 PLUS Forensic data acquisition unit can authenticate an image using SHA-1, SHA-2, MD-5 of the captured "Suspect" hard drive on the fly.

Uploads "Suspect" Images to Network Storage: With the use of the Image MASSter Solo-4 G3 PLUS Forensic data acquisition unit, user can upload "Suspect" drive Data Images to Networked Storage Area using 1 Gigabit Ethernet Connection for the purpose of sharing, processing and archiving forensic capture data over the network.

Preview Data directly on the Image MASSter Solo-4 Forensic G3 PLUS data acquisition unit: User can preview active files on the "Suspect" hard drive utilizing Windows 7 file viewers.

Suggested Accessories for this product...

Solo-4 Expansion Box(when ordered with Expansion Ready Solo-4)

Our Price: $1,610.00

Add

Solo-4 Expansion Box(when ordered with Expansion Ready Solo-4)