The following Software features come standard with the IM WipeMASSter unit:
.: HPA Option: The WipeMASSter unit supports sanitizing HPA areas. HPA is defined as a reserved area for data storage outside the normal operating file system. If an HPA area exists on a drive the WipeMASSter will clear and erase the HPA area.
.: DCO Option: The WipeMASSter unit supports sanitizing DCO areas. DCO allows systems to modify the apparent features provided by a hard disk drive. If DCO is detected on the drive, the WipeMASSter will clear and erase the DCO area.
.: WipeOut DoD: This function is designed to erase all data on disk drives. Sanitize up to 9 drives simultaneously at speeds greater than 3GB/min. WipeOut was designed to meet the U.S. Department of Defense specification DOD 5220-22M regarding the sanitization of hard disk drive data. Each iteration makes two write passes over the entire drive.
.: WipeOut Fast Option: The Wipeout Fast option provides a quick non-DoD method of sanitizing a drive of all previously stored data. Allows erasing data in one pass.
.: Store Log and Database Information: The unit provides functions to display and store real time event information in a log and database format.
.: Manage User Defined Settings: This built in feature allows authorized users to store multiple user defined unit settings.
Optional Software
.: FORMAT FAT32: The FORMAT FAT32 Option provides the capability of performing a quick FAT32 format on multiple drives. The operation creates a non-active FAT32 primary DOS partition on the drive(s) connected.
Optional Hardware
.: Serial-ATA Adapters:Single Channel and Multi-Channel S-ATA adapters are available to support sanitizing S-ATA drives. The S-ATA 9-Channel adapter coverts all ports of the WipeMASSter for S-ATA usage. The Single Channel S-ATA adapters allow mixing P-ATA and S-ATA drives.
.: Notebook Adapters: ICS proprietary Notebook Adapters enables the WipeMASSter to support a variety of Notebook models that use a proprietary Notebook drive interface. Adapters available include adapters for the IBM Think-Pad, Compaq Armada, NEC Versa, Dell Latitude, and Toshiba Tecra. The ICS Standard 2.5” adapter supports all Notebook drives which do not have a proprietary interface or have been removed from their proprietary enclosures. An ICS proprietary adapter is also available for the 1.8” ATA drive interface.
.: Flash Adapter:The Flash adapter was designed to support 50-pin micro-drive devices.
.: AShelf Solution:This Shelf Solution provides the WipeMASSter user with an alternative method to mount nine drives to the unit. The standard tray format requires the drives to be mounted vertically, while the Shelf Solution allows the drives to be mounted in the traditional horizontal position.
.: Drive Cooler Solution: Reduces the heat generated by the hard drives and maintain a comfortable operating temperature.
