Features
.: High Speed Operation: Transfer rates can exceed 3.9GB/min. No speed degradation when copying to 4 hard drives.
.: Copy to Multiple Drives Simultaneously: Copy data to 4 target drives simultaneously with no speed degradation.
.: Multiple Media Support: The IM3004S SCSI duplicator supports current SCSI interfaces such as Ultra-160 and Ultra-320, including SCSI Narrow (50-pin), SCSI Wide (68-pin) and SCSI-SCA80 (80-pin). Supports data transfer between P-ATA and SCSI hard disk drives using optional SCSI to P-ATA converters. Also supports SCSI to S-ATA using optional SCSI to S-ATA converters.
.: Multiple Copy Methods: Copy data in a sector-by-sector method, which supports copying any O/S and file system. Copy only allocated data using the ICS proprietary intelligent copy method known as “IQCOPY”, which supports Windows FAT-16, FAT-32 and NTFS file systems.
.: Partitions and Formats Drives: Target drives are automatically partitioned and formatted during the copy process, eliminating the need to manually prepare a drive prior to usage.
.: Copy between Different Drive Models and Sizes: Simultaneously copy data between different drive models and capacities. Partitions will automatically be scaled to the size of the target drive.
.: WipeOut: Sanitize (per DoD specs) up to 5 SCSI drives simultaneously at speeds greater than 3.5GB/min (see software tab for details).
.: Bad Sector Handling: Provides flexibility in handling bad sectors found on the source drive.
.: Log Information: Store detail operational event log information.
Software included
.: IQCOPY: IQCOPY provides a fast method of duplicating Windows based drives using the FAT and NTFS File Systems. Only the allocated drive space is copied. Creates a fully operational copy of a Windows based load in under a minute.
.: Auto Scale and Format Partitions: Automatically scales and formats partitions to the size of the target drive using the IQCOPY mode of operation.
.: Image Copy: All allocated and unallocated drive space is copied in a sector by sector copy method to produce an exact image of the source drive. Supports all O/S and File Systems.
.: MultiMASSter: The MultiMASSter option provides the user with the ability to store multiple software loads to a single drive. The user can then select and copy individual software loads from the MultiMASSter drive. Depending on drive space, up to 24 loads can be stored on a single MultiMASSter drive.
.: WipeOut DoD: This function is designed to erase all data on disk drives. Sanitize up to 5 drives simultaneously at speeds greater than 3.5GB/min. WipeOut was designed to meet the U.S. Department of Defense specification DOD 5220-22M regarding the sanitization of hard disk drive data. Each iteration makes two write passes over the entire drive.
.: WipeOut Fast Option: The WipeOut Fast option provides a quick non-DoD method of sanitizing a drive of all previously stored data. Allows erasing data in one pass.
.: Log Information: Store detail operational event log information.
Optional Hardware
.: SCSI to P-ATA Converters:The SCSI to P-ATA Convertors extends the unit’s capabilities by allowing data transfer between SCSI and P-ATA drives. These converters allow copying SCSI to P-ATA, P-ATA to SCSI or P-ATA to P-ATA.
.: SCSI to P-ATA Converters:Supports duplication of S-ATA hard drives on IM3000 SCSI unit. This option allows you to attach any S-ATA hard drive to any port (target and/or master) on the Image MASSter 3000s SCSI Disk Drive Duplicator, and copy to or from a SCSI or SATA hard drives.
.: Hard Drive Coolers: Protect hard drives from EMI noise and reduce the hard drive heat.
|
